2022년 11월 2일 수요일

BISOPE series 20 Why is there a difference in the speed of sound in sol...


BISOPE series 20- Why is there a difference in the speed of sound in solids and gases?

--------------------------------------------------------------------------------------------------------------------------------------

Why is there a difference in the speed of sound in solids and gases?

 

The speed at which sound waves propagate through a medium is the definition of sound speed. The medium itself does not move, it is the propagation speed of the phase of the sound wave. When looking at the wavelength as the origin, sound waves in a narrow sense propagate through the fluid as longitudinal waves (penetrating the medium in the propagation direction), and their speed varies depending on the conditions of the medium such as temperature and humidity and the type of medium.

 

Change in momentum and rate of volume change

 

​The propagation speed of longitudinal waves is determined by the mechanical properties of the medium. Considering the change in momentum of the fluid moving in the piston (vt) with a certain cross-sectional area (A), it can be viewed as the product of the mass (ρvtA) of the fluid and the change in velocity (u). On the other hand, when the pressure increase Δp in the moving fluid is obtained, the initial volume Avt of the fluid in motion is decreased by Aut, so from the definition of the bulk modulus (;- pressure change/volume change rate)

 

Velocity of sound, modulus of elasticity - https://blog.naver.com/vs72

 

is established At this time, 'B' is the bulk modulus, and when the medium is a fluid, it corresponds to the volume modulus (volume change rate), and when the medium is a solid, it corresponds to the Young's modulus. Since it is larger than the bulk modulus of , the velocity in the medium of longitudinal waves is ultimately influenced by the difference in the velocity of sound by the difference in the volume modulus rather than the difference in the density. V solid > V liquid > V gas !

 

Difference in speed of sound - https://blog.naver.com/vs72

 

What is the difference between the speed of sound and the speed of particles?

 

As the speed at which sound waves propagate through an elastic medium, the formula is the same as above, and among them, the speed of sound in the air is expressed conveniently and c=20.06√T in relation to temperature.

On the other hand, particle velocity (v) is the vibration velocity of a medium that transmits sound waves, and when it is assumed as a plane wave, it can be expressed as v=p/ρc. (T: absolute temperature, p: pressure, ρ: density, c: speed of sound)

 

 

 

Wavelength, particle velocity - https://blog.naver.com/vs72

 

speed of sound in different media

​All copyright Korea CBM Co., Ltd. written by BISOPE

 

#vibration measurement, #vibration analysis, #frequency analysis, #resonance measurement, #resonance analysis, #3-axis vibration, #accelerometer, #fft, #bearing vibration, #vibration noise education, #equipment diagnosis, #cbm, #bearing vibration , #building vibration, #gear movement, #visope, #looseness, #environmental vibration, #rotating machine, #vibration education, #vibration monitoring, #balancing, #volume modulus, #sonic velocity, #noise and vibration

All copyright  korea CBM  written by BISOPE , vs72@naver.com, 070-4388-0415,  www.kCBM.kr



#vibration measurement, #vibration analysis, #frequency analysis, #resonance measurement, #resonance analysis, #3-axis vibration, #accelerometer, #fft, #bearing vibration, #vibration noise education, #equipment diagnosis, #cbm, #bearing vibration , #building vibration, #gear movement, #visope, #looseness, #environmental vibration, #rotating machine, #vibration education, #vibration monitoring, #balancing, #volume modulus, #sonic velocity, #noise and vibration


54 설비진단도구기술들의 특징 비교


설비진단도구(기술)들의 특징 비교 -진동분석,윤활,초음파,열화상,전류

사람의 건강 이상원인을 알아내는 것처럼 기계가 아픈 상태의 그 위치와 원인을 알아내는 것도 있는데 이러한 방법으로 결함을 찾아내는 기술을 '설비진단, 기계건강진단'이라고 한다. 청진기만 가지고 진단하던 한의학에 비교하면 최근의 건강의학은 많은 검사기술에 의존한다. 설비진단도 마찬가지이다. 진동진단기술에만 의존하던 진단기법은 다양성을 요구하며 초음파, 열화상, 전기분석 등 실제로 다양한 기술들이 사용되고 있다. 설비진단기술을 정리하여 본다.

설비진단기술들의 종류 및 특징


......나타내는데, 그 위에 표시된 각 설비진단도구의 주요 활용 감지영역을 비교해 볼 수 있다. 진동은 거의 모든 결함신호를 검출할 수 있는 중요하고 최선의 기술이지만 조기 결함진단 측면에서, 그리고 정확성 측면에서 취약한 면이 있다. 따라서 이를 윤활이나 기타 전기결함분석 툴, 또는 초음파를 통해 기술을 보완할 수 있다.


설비진단기술 도구의 특징비교-kcbm.kr

관련 Tag

#설비진단, #회전기계설비진단, #MHM, #상태진단, #RCM, #RBM, #진동, #초음파, #AE, #열화상, #윤활분석, #자속, #설비진단기술, #진동측정, #주파수분석, #공진분석, #모니터링

53 음속 고체와 기체에서의 그 차이


음속-고체와 기체에서의 그 차이-소음진동이론

고체와 기체에서의 음속의 차이가 나는 이유?

음파가 매질 속을 전파하는 속도가 음속(Sound speed)의 정의다. 매질 자체가 움직이는 것이 아니고, 음파의 위상(Phase)의 전파속도이다. 파장을 원점으로 볼 때, 협소한 의미의 음파는 종파(매질을 전파방향으로 관통하는)로서 유체를 통해 전파되며 온도, 습도 등 매질의 조건과 매질의 종류에 따라 그 속도가 달라진다.

운동량의 변화와 체적변화율

종파의 전파속력은 매질의 역학적 성질에 의해 결정된다. 어떤 단면적(A)으로 피스톤 안에서 운동하고 있는(vt) 유체의 운동량의 변화량을 생각해 보면, 유체의 질량(ρvtA)과 속도 변화량(u)의 곱으로 볼 수 있다. 한편, 운동하는 유체에서의 압력 증가량 △p를 구하면, 운동 중에 있는 유체의 처음 부피 Avt는 Aut만큼 감소하였으므로 .....

All copyright 한국CBM(주) written by BISOPE,