2025년 2월 16일 일요일

진동소음공진 하이라이트 392-visope (진동정의, 진동증가원인, 피리공명, 롤편심)

 진동이란?

-사전적 의미의 진동이란? 물체의 위치, 전류의 세기 등 물리량이 일정시간마다 일정한 값으로 반복적으로 변동하는 현상이며,​-공학적인 개념으로 진동은 운동에너지와 위치에너지(탄성에너지)의 교번에 의한 운동으로 정의할 수 있다.-진동학에서는 진동이란 질량(Mass)과...

https://contents.premium.naver.com/bisope/visope/contents/250203104058140lj





진동의 증가원인

진동의 증가원인은 최초의 원인과 크게 다르지 않지만 원인들이 서로 증가하며 연동하거나 그 이유들은 자연적인 또는 인위적인 이유들로 인한 것이 된다. 따라서 진동이 증가하여 유지보수가 필요한 상태가 되는 것이 결과가 된다. 이 것은 결국 모니터링으로 확인하며 알람-분석-진단-대책으로 유지보수를 수행하게 된다.

https://contents.premium.naver.com/bisope/visope/contents/250205074122769ft





유체와 고체의 마찰 그리고 (제갈?)공명

피리에 바람을 넣어서 소리를 발생하는 것은 어쩌면 음을 창조하시는 겁니다.

생명의 소리, 아니 소리가 생명이죠. 왜 그렇게 생각하냐면…유체는(공기, 물) 속도와 압력을 가지고 피리속의 공간 내부를 이동합니다. 이때 내부 고안에 마찰이 전혀 없이 곧 바른 유체의 통로라고 하면...

https://contents.premium.naver.com/bisope/visope/contents/250207075816989iv





롤의 가동시 편심(Eccentric)

‘롤이 편심되었다’는 것이 '둥글지 않다'는 것만을 의미하지는 않는다.

물리적으로 정적인 형상은 둥글지 않을 수 있어도 부하를 받은 상태에서는 원형이어야 한다. 그러나 회전하고 있는 동적인 상태의 형상은 비록 롤의 표면이 유연성이나 딱딱함이 다를 수 있기 때문에 롤은 편심될 수 있다.

롤 재질과 온도의 팽창과 부족의 비동질성은 롤의 변형을 유발할 수 있다.

https://contents.premium.naver.com/bisope/visope/contents/250212072924886ug





#롤진동, #편심, #주파수, #진동증가, #진동정의, #파동, #원심력, #운동에너지, #피리소리의원리, #공명, #유체마찰, #광대역소음, #고유주파수, #흔들림

https://blog.naver.com/vs72


2025년 2월 12일 수요일

BISOPE series 78 Compressor Vibration Analysis Sequence


BISOPE series 78- Compressor-Vibration Analysis Sequence        ----------------------------------------------------------------------------

Some people suddenly ask for analysis of the cause by only providing the overall vibration value, saying that the vibration is large, in order to solve the vibration problem. There are also cases where they send trend data and request vibration diagnosis. And there are also cases where managers ask for objective opinions for the best solution while providing maintenance history data and measurement data.

However, in all these cases, they can only answer if they ask for simple knowledge, and since they have not checked the site, they cannot provide real help. Rather, they can only judge the level of the questioner.

This is still the weakness of Korea. They are accustomed to the fact that consulting requests and solutions are easy and can be provided for free. If it is a solution or solution that does not make the same mistake after requesting it once, it should not be a waste to pay a large price.

 

Compressor Defect Diagnosis - Vibration Analysis Procedure

 

Vibration analysis and finding solutions to vibration problems require a very logical procedure.

An analyst must gather necessary information based on the cause analysis, but random data is not always good, so it is recommended to refer to the following order.

A professional does not move suddenly. Also, a true professional must check the site.

 

--------

The vibration problem can be a manufacturing problem, a maintenance and installation problem, an operational problem, or a measurement system or seasonal problem. Vibration analysis is finding hidden data among the data that is not hidden.

Key! Vibration Diagnosis of Compressor, Spectrum Analysis, Vibration Analysis, Vibration Problem Consulting.

#vibration measuring instrument, #frequency setting, #Fmax, #maximum frequency, #sampling frequency, #sampling rate, #FFT, #3-axis vibration sensor, #acceleration sensor, #vibration education, #building vibration, #vibration measurement, #resonance analysis, #resonance measurement, #vibration monitoring, #vibration noise consulting  www.kCBM.kr,   https://blog.naver.com/vs72 , https://contents.premium.naver.com/bisope/visope