진동센서는 시간에 따른 신호의 구분에 따라서 크게 두 가지 종류가 있다. 기준위치를 중심으로 반복하는 진폭과 기준위치를 벗어난 길이를 모두 측정할 수 있는 DC센서의 대표적인 '와전류 타입(Proximity probe) 변위센서'도 있고 AC센서의 대표적인 기준위치를 중심으로 반복하는 진폭만을 측정할 수 있는 '압전형(Piezo electric) 가속도센서'도 있다. 그 밖에 기준위치를 중심으로 반복하는 진폭과 아울러 중력가속도를 기준으로 센서의 설치방향을 추가로 알 수 있는 MEMS 가속도계 또는 Gyroscopic센서도 있다.
진동을 발생시키려면 어떻게 할까요? 충격을 주거나 또는 반복적으로 흔들어 주면 될 겁니다. 이 진동을 재현할 수 있으면 시험할 수도 있고 교육할 수 도 있고 느낄 수도 있습니다. 이렇게 진동을 마음대로 재현할 수 있는 장비를 가진기(Shaker)라고 합니다. 이 가진기는 센서의 정상여부도 판단하여 일부 교정할 수도 있습니다. 진동계측기와 센서를 보유하고 있다면 탐나는 시험기입니다. 이제는 얼마나 정확한 진동을 발생시키는가를 확인하면 됩니다.
진동가진기 교정기-visope
Shaking and Testing!
표준진동가진, 교육용, 시험용 진동발생
여러분이 구성하고 있는 시험시스템에서 원하는 진동주파수와 진폭을 발생시키고 측정하고 싶은 경우 예를들어,”15Hz ,1G를 발생시키고 싶은데 좋은 방법이 없을까??”
또 실험실, 교육장, 공진시험 등에서 “다음처럼 센서를 설치하고 진동을 이렇게 발생시키면 스펙트럼으로는 어떻게 나타나는지 시험해 볼까요?”를 위해서 반드시 갖추어야 하는 중요한 구성요소로 Shaker가 있겠다. 이러한 표준진동발생기가 있다면 아주 편하고 정확하게 교육과 시험을 할 수 있다. 복잡한 신호발생기(signal generater), 엠프나 케이블이 필요없다. 그냥 버튼을 돌려 설정하고 진동을 발생시면 된다..
다음의 용도로 사용
표준 진동발생장치(Vibration shaker)가 필요한 곳(검사용, 교육용, 센서교정용, 계측기 시험용)
장점 -주파수 및 진폭 설정 및 확인장치, 충전식, 이동식
More information?vs72@naver.com, 070-4388-0415, 한국CBM, www.kcbm.kr
The amount of charge generated from the transducer
(sensor; converter) must express minute differences, so careful attention is
required on the measurement path. In particular, noise from cables or noise
caused by installation errors can lead to fatal measurement errors. Modern
measurement methods are more compact, more accurate, and often include
self-calibration. In particular, the external amplifier (Charger type) system used in the
past must amplify and use the amount of electricity by using an amplifier in
the middle in order to show a large amount of small charge.
When pressure is applied, electricity is generated... The
amount of charge generated by the 'piezoelectric effect' is very small,
and as you can imagine, it is not enough to perform the 'generating function'
that electricity will be generated when vibration is applied to the element.
Th
Transducer(센서; 변환기)로부터 발생하는 전하량은 미세한 차이를 표현해 주어야 하므로 측정경로상에 세심한 주의가 필요하다. 특히 케이블의 노이즈나 설치오류에 의한 잡음 등은 치명적인 측정오류로 이어질 가능성이 있다. 최근의 계측방식은 보다 컴팩트하고 정확하며 자기검정이 포함된 경우가 많다. 특히 과거에 사용하던 외부증폭기(Charger type)시스템은 작은 전하량을 크게 나타내기 위하여 중간에 증폭기(Amplifier)를 사용하여 전기량을 증폭하여 사용하여야 한다.
Engineering-Generally, when expressing the 'size' of noise,
vibration, electricity, etc., the unit of 'dB (decibels; dB)' is used. If this
value is large, it means that the value of noise vibration is large. Why were
these units created? You can just say pressure (pa), acceleration (G), and
voltage (V) as they are... The reason is that the unit of dB is easy to
represent the 'range of change for sensory power'. So, strictly speaking,
dB cannot be called a unit because it is a different value depending on how the
standard is set.
Weber-Fechner's law
The change in the amount of human sensation (P) can be best
expressed as the ratio of the amount of change to the standard stimulus amount
(S).
In the above formula, the basic unit is 'Bell', and
in order to compensate for the fact that the width of the upper and lower
stages is too sparse, 'dB; Decibel' is used by substituting 10 for the constant
'K'. In addition, since it is most suitable to express the change in the a