BISOPE series 24 Vibration sensor measurement location and direction Ac...

BISOPE series 24- Vibration sensor measurement location and direction (Accelerometer measurement point install & direction)

--------------------------------------------------------------------------------------------------------------------------------------

If an accelerometer is used to measure vibration, it must be attached securely to the vibrating surface. Be mindful of the knowledge of contact resonance, such as magnets, bonds, screw studs, and wax. On the one hand, consider the issue of where to attach the #vibration sensor. Also, in order to solve this vibration problem well, there will be questions about which direction to measure and which spatial position of the target object to set. Before finding evaluation criteria for evaluating vibration, these principles should be understood first. Here, we will explain the points and directions for vibration measurement (#condition monitoring, #facility diagnosis, #online monitoring, #vibration frequency analysis) promised to engineers internationally.

Setting the vibration measurement location and direction!

 

The first reason for measuring the vibration of an object (structure or machine) is for evaluation (#Assessment), and the second reason is for diagnosis (diagnosis) to identify the cause of vibration. However, in order to diagnose, it is necessary to check the behavior (moving, deflection shape) of the object in advance in addition to frequency analysis. (Non drive end, NDE, Outboard) in each direction (horizontal, vertical, axial-H, V, A) must be measured. This is because only then can the behavior of an object be guessed.

Of course, if the location to be measured is limited or the object is too small, and...................................

 

All copyright  korea CBM  written by BISOPE , vs72@naver.com, 070-4388-0415,  www.kCBM.kr