BISOPE series 17 Advantages of TBM and CBM Conservation Engineering of ...

BISOPE series 17- Advantages of TBM and CBM (Conservation Engineering of Time-Based Concept and State-Based Concept)

--------------------------------------------------------------------------------------------------------------------------------------

 

'Time Based Maintenance' and 'Condition Based Maintenance' are the most used techniques among maintenance methods (maintenance and maintenance methods) performed before equipment failure occurs. have. Generally, there are industries and companies that use only 'TBM', and there may be companies that use 'TBM' and 'CBM' together, but there are very few fields that only use 'CBM'. As such, the preliminary maintenance of the time-based concept is an important process.

 

TBM, CBM

TBM is one of the PM (Planned Maintenance) maintenance, for example, once a year, after 2 million km of driving, after 30,000 operating hours, etc. means

This is usually planned by the production support team, public affairs team, maintenance team, etc. The maintenance cycle is very important in terms of reconfirming the normal and stable operation of the facility, even though there may be unnecessary maintenance, as the plan for the most optimal efficiency is established based on industrial engineering statistics.

However, when re-testing the equipment, unstable stabilization is required just like when the equipment was first introduced, and depending on the level of maintenance and the completeness of the manual, bad moments are experienced.

So, the best way is to limit periodic maintenance as much as possible, to set a separate maintenance period while looking at the condition, and to arrange only the necessary parts. This is the concept of condition-based and predictive maintenance. These PdM (Predictive, predictive maintenance) and condition-based maintenance (CBM) have many advantages. will play a large role.

 

However, these two preventive maintenance techniques, such as time conservation and state conservation, do not select one, but complement each other's weaknesses by merging each other to complement each other's weaknesses. In fact, this is the method adopted by large-scale factories with optimum efficiency.

 ​

All copyright 한국CBM written by BISOPE

 

All copyright  korea CBM  written by BISOPE , vs72@naver.com, 070-4388-0415,  www.kCBM.kr

bearing fault,3axis,CMS,monitoring,vibration,resonance,mems,measurement,CBM,MHM,PHM,natural frequency,FFT,Pdm,Accelerometer,Frequency,SHM,vibration analysis,VMS,